Air compressors make the usage of battery-powered tools a piece of cake. This is why it is important to comprehend and understand the mechanism of air compressors and how to use them. There are multiple steps and precautions compiled below to make the process simple and easy for you.
First off, we begin by setting up the compressor. The first step is to check the level of oil. You may place a dipstick until one end reaches the end of the container. If the oil level reaches about two-thirds of the dipstick, then we are good to go. First off, we begin by setting up the compressor. The first step is to check the level of oil. You may place a dipstick until one end reaches the end of the container. If the oil level reaches about two-thirds of the dipstick, then we are good to go.
Next, you need to join the hose to the regulator valve of the compressor. Connect your power tool with the hose. Place the power tool and hose in each of your hands and keep twisting until they are locked in securely.
Next, plug the compressor into a grounded outlet. Ensure that the main switch is turned off before you plug in. avoid the usage of extension cords for safety reasons. They give birth to issues related to overheating.
How to Operate the Compressor?
Putting safety first, throw on a pair of safety goggles and closed-toe shoes. If you are sensitive to loud noises, consider wearing ear muffs too.
Begin by testing the valve. Release the valve to hear a faint hiss of air escaping. This indicates the valve is functioning well. Next, switch on the compressor and wait until the tank starts to pressurize. Keep an eye on the larger pressure gauge; the trapped air reaches its maximum pressure when the needle stops moving.
There is a smaller gauge too, which doesn’t show any indication, which is okay for the time being. This smaller gauge displays the air pressure in the hose.
Adjust the pressure according to your tools requirements. There is a pressure regulator knob; twist it to match your tool’s PSI.
You can operate the power tool while the air is trapped inside. Pressurized air indicated that your tool is good to go!
Know Your Duty Cycle Rating
It is important to know the duty cycle of your compressor. This is the work rate the motor can handle without jeopardizing the longevity of your compressor. Some compressors do have a 100% duty cycle.
This indicates the compressor will work just fine even if it is operated all day without any break. While others may have a lower duty cycle. It is important to operate accordingly, to avoid damage
A few tips and tricks are gathered below to make the procedure easier.
- Ensure the CFM and PSI of your compressor and power tools match.
- If the power outlet is further away from your compressor, use a hose instead of extension cords for greater reach.
- Keep the compressor running with the drains open for 30 minutes to break in the motor
- Monitor the air filter and replace it from time to time.
- Void the tank after usage to prevent moisture build-up.
How to Safely Shut off the Compressor?
Wrapping up the system is as crucial as the whole procedure. When you are done using the air compressor, drain the valve to release condensation. Switch off the compressor to channel out the pressure. Begin by piping out air from the hose first. Unplug the compressor from the power outlet and then remove the hose.
How to Maintaining Your Air Compressor?
Decompressing the tank at the end of the day to maintain quality and efficiency is vital. You should have a habit of changing the air filter every once in a while. This helps to avoid any issues and can save you unnecessary repairs worth hundreds of bucks.
Monitor the oil level of your compressor. Refill if the oil level falls. Air Tanks Have a limited Lifespan. Voiding the tank will help extend it and avoid the risk of bursting.