thetoolsdoctor.com depends on reader choice. When you buy through our link, we may earn an affiliate commission. Learn More
I wasn’t sorry when my hand tools rusted because I did not know how to remove rust from tools.
And I can bet I am not alone. Good numbers of readers here share the same experience. This is a state of inexperience. But if you work with tools, you must know the facts of rusting. And how to prevent it.
Rusting is a common enemy of everyday metal tools. It makes them look ugly. Reduces longevity. And cause many more problems.
Thereby, if you know how to remove rust from tools, it would be a plus. Cleaning the tools become easier. They will look like new.
In this post, you will get a couple of DIY hacks. They are useful and take less time to remove the rust. Moreover, the cleaners are natural. So, let’s start the exploration.
Why you need a DIY solution to rusting?
I should make it clear why you need a DIY solution to rusting. Of course, there are many commercial cleaners available. But at times, you may need to clean the rust immediately. At that moment, you may not avail of the commercial products.
But if you know how to do it at home, that would benefit you in every way. You need not panic if you witness such issues.
The DIY processes
Applying vinegar helps you to clean rust from your tools. Vinegar is a natural element. And it has some unique properties to remove rust.
Take a couple of spoons of vinegar. Pour it into a bowl of water. Mix the vinegar with the water properly.
Now, soak the tools (small tools preferable) on the solution. Wait for at least six hours.
During this time, the vinegar will soften the rust. After around six to seven hours, take out the tool. Now, use a scrubber to remove the rust. You can also use a metal brush for this purpose.
Rub the tool until all the rusts vanish. It may take around three to four minutes. Then, rinse the device with clean water. Dry them properly. And they are ready to use.
Try lemon juice:
Lemon is an acidic fruit. Also, it is a natural cleaner that can remove rust.
Alongside lemon juice, you need salt for this purpose. As the first step, rub the salt on the tool(s). Significantly, on the rusted areas. Make sure the salt covers all the rusted space. Now, take the lemon. Squeeze the juice on the tool. Allow around two hours so that the juice and salt get mixed with the rust.
Finally, you have to use a scrub. Rub off the mixture. It will remove the rust from the tool.
Two Bonus Tips
Apply baking soda:
You can also try baking soda for the same purpose. The process is almost similar.
You are to make a paste using water and baking soda. Make sure the paste is thick enough. Now, it is time for action.
Apply the baking soda to the rusted areas. Wait for at least two hours. During this time, the baking soda will sit on the rust. After two hours, scrub off the baking soda.
Experts recommend using a toothbrush for the removal process. No rush. Take time as long as it needs to be adequately cleaned. Finally, clean the tool using freshwater. Dry the tool. Using a fresh and soft towel to wipe the tool would be sufficient.
Use sandpaper for deeper rust:
Also, you can use sandpaper for the removal of rust from tools. This method is applicable for deeper rust. However, you will need a couple of other items too.
Things you need:
As the first step, you are to clean the tool. Usually, the tools are covered with dirt. You can find grease too – if they are for heavy-duty use. Clean all the dirt and grease from the tool. Rinse with water and wipe them with a clean and soft cloth.
Now, you are on the second step. Scrub the tool. Ensure the scrubbing is heavier – not gentle. Otherwise, the rust will remain on the tool.
Scrub the surface using the cleaning pad, then apply the sandpaper (the coarse one). Gradually, the rust will vanish. However, if you still see rust, scrub for a few minutes more.
Clean the tool with fresh water. Lastly, it would be best to use sandpaper (the fine one) for a finishing touch. After scrubbing, rinse the tool with water. Let it dry. The game is over!
Hopefully, you now know how to remove rust from tools. The ways mentioned here are simple but effective. Following the tracks, you can get rid of rust in your tools. However, for any serious issues, you must consult with professionals.
Sharing is considered caring. So, share this post on your social platforms. Also, you can add your valuable comments in the comment section below.